Backyard Metal Casting.
Posted: Tuesday, March 14, 2006
by Col C
The Home Foundry
Any practical home handyman can melt metal in the backyard hobby
foundry, all you need is a si
If you're just beginning your backyard metal casting journey, you will have
questions to ask and if you follow the right advice, your learning time
will be greatly reduced. The furnace is the most important piece of equipment for your hobby foundry set up. To avoid any frustration &
disappointment make sure you build it right the first time.
You may have to spend a few dollars to buy high temperature resistant
refractory, which is used to line the furnace walls with, plus a few brass
connectors for the gas feed line, if you are handy with a welder you'll also be able to make your own gas burner. And if you have metal working skills, you'll be able to make many of your own tools and equipment to use in your hobby foundry.
Once you have a furnace built, you'll need to gather some sand so that you can pour the molten metal into. One of the most common moulding mediums used is green sand, this has long been one of the all time favourites because of its ease of use and predictable results. Green sand will also sit and keep moist for weeks in a plastic garbage bin waiting the next moulding session.
Green sand is the most efficient, low cost way for the backyard metalcaster to make moulds for metal casting. Green sand does require maintenance and looking after to get the best results, but it will last for many years for hobby use and can be used over and over again.
Another easy to use backyard moulding system to use is the silicate, sand & Co2 Gas system. This really is an easy system for the backyard worker to use it is frequently used in trade schools and colleges for foundry
practice instructions because of its ease of use, small batches of moulding sand can be quickly made up.
However there is one thing that can be detrimental to the Co2 performance and that is if any excess moisture is in the sand, moisture levels above 0.5% will give poor moulding results. There is also a rental cost of the Co2 gas bottles, plus the purchase of gas cylinder regulators required for correct gassing of the sand moulds.
With the right kind of knowledge and know how the backyard metalcaster will soon begin to see some great results, many Beginners are quite amazed at what they can achieve once they have learnt the right way to go about backyard metalcasting.
For best results, learn from established proven methods, or you will spend many months floundering around by yourself, not knowing what to do. To dramatically reduce you're journey to metal casting success learn from fourteen years of metal casting experience, visit our web site
now. http://www.myhomefoundry.com
This Article has been viewed 3,320 times. (Not updated in real-time.)
No comments yet.We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.